Lighting Triggers & Remotes, Photo & Video Lights

Godox Wireless Flash Trigger for TT560/520

Name: Godox Wireless Flash Trigger for TT560/520
SKU: 10889
Availability: InStock

KSh 3,800.00

Add to wishlist

Compare

Product Highlights

Wireless Flash Trigger.
16 channels selectable.
Power Input of Transmitter: 23A 12V battery (included). Power Input of Receiver: 2 AAA batteries.(not included).
Long lifetime of trigger battery, one year or over 20,000 continuously triggers.
Plug size of receiver: 3.5mm.
Adapter size for receiver plug: 3.5mm –> 6.35mm.
Radio working frequency: 433MHz.

Function Introduction RT Series Studio Flash Trigger is based on a wireless remote system. The transmitter enjoys an advanced electric circuit which is designed with sleepy function, so it has very low power consumption. The receiver is used with alternating current, and it achieves quick response under the advanced MCU control. It can meet the need of sync flash for any different shutter camera.

Compare

Features

Compatible with Neewer S101-300W, S101-400W, and Other Studio Lights
This wireless trigger is control discreteness for the camera to trigger the hot shoe flashgun synchronously.
Easy installation, low power consumption
No damage to the camera.
High-speed and synchronous for 1/200 second.
Max. working distance: 30M (open area, without interference).
16 channels to avoid interference.
The receiver has an on/off switch, and an LED to indicate triggering.
New design: Channel Selector outside the transmitter and the receiver.

Specification

Wireless Flash Trigger.
16 channels selectable.
Power Input of Transmitter: 23A 12V battery (included).
Power Input of Receiver: 2 AAA batteries.
Long lifetime of trigger battery, one year or over 20,000 continuously triggers.
Plug size of receiver: 3.5mm.
Adapter size for receiver plug: 3.5mm –> 6.35mm.
PC sync cable included.
Radio working frequency: 433MHz.

How to use

Make sure the channel selector of both transmitters and receivers are in the same position.
Insert the receiver’s trigger output plug into your flash’s jack.
Press the test button on your transmitter. The studio light should now flash.
Insert the transmitter’s hot shoe socket into your camera’s hot shoe jack (if your camera does not have a hot-shoe use a PC sync cord and insert it into the socket).
You should now be ready to start shooting (you can use the 3.5mm sync cable for cameras without hot shoe or Hotshoe is engaged).

Package Contents